I thought the idea of being able to get up to date Metar info over RF was a neat SVXLink feature. Unfortunately, I was unable to get it working as described. I believe the issue is because the NWS website now features SSL Encryption and SVXLink hasn’t been updated to handle this. My work around…
Read more
At the end of part 1 we had Tx setup and working from the Raspberry Pi to the Baofeng HT. Let’s dive in and get Rx working.First let’s head back to our svxlink.conf and enable Rx under the [Simplex] section. Under [Simplex]:Rx=Rx1Save the changes and exit nano using“ctrl + x” | “y” | “enter”Go ahead…
Read more
While prepping for Winter Field Day I was inspired to setup a Raspberry Pi for portable/emergency operations. This ‘concept’ has lead me down a rabbit hole of HAM Radio fun. Although not on my original Pi to do list. I thought I could setup an Echolink node to our local repeater using a Raspberry Pi…
Read more
As a new HAM you learned you can start operating as soon as your Call Sign appears in the FCC database. A link to an official copy of your license will be e-mailed to you if you provided your e-mail address while completing your NCVEC 605 form. However, the link is only valid for 30…
Read more
This project is largely based off VK5FSKS and WT4Y’s design, with a few modifications. I only intend for the Fox to be in use for a few hours at a time. Therefore, I pulled 7v DC power from the Baofeng UV-5R battery to power the Arduino Mega using a barrel connector. You could use a…
Read more